Give us the size. We cut the board.

Type the size of the piece and how many. The plan shows how they come out of a sheet, what is left over, and what they cost.

Decor: Light oak
700 × 500700 × 500700 × 500700 × 500700 × 500700 × 500700 × 5002440 mm1220 mm
Sheet 1 / 2
Pieces from a sheet
7
Sheets
2
Offcut
41%
Edging
14.0 m

Boards we cut

Full sheets in stock, cut to the size of each piece. Ask for a board that is not listed.

BoardThicknessUsed for
Melamine-faced chipboard8, 16, 18 and 25 mmCarcasses, shelves and doors in a ready-made decor
MDF6 to 25 mmFronts and panels to be painted
Birch plywood9 to 24 mmStrong shelves and visible edges
Hardboard3 mmDrawer bottoms and cabinet backs
Two pieces of chipboard held in a hand, one faced in white, one in a wood decor
Melamine-faced chipboard: a pressed core with a decor on each face.
A vertical panel saw on a workshop wall, with a sheet standing in it
A vertical panel saw: the sheet stands, the saw runs across it.

Cut on a panel saw

Straight cuts from edge to edge, the way the plan above lays them out.

Sheet2440 × 1220 mm
Saw cut4 mm, allowed for between pieces
AccuracyWithin 0.5 mm of the size you give
Longest pieceUp to 3600 mm, from long boards
PiecesFrom 1; up to 1,000 priced here

Edged where it shows

Choose the sides above and the plan marks them in orange. The edging matches the decor of the board.

  • 0.4 mm ABSShelves and the backs of carcasses
  • 1 mm ABSEdges that are seen and touched
  • 2 mm ABSDoors, fronts and worktops
A worker feeds a white panel through an edge banding machine
A panel going through the edge bander.
A sheet lifted by a vacuum hoist onto a CNC nesting router in a large workshop
A sheet going onto a nesting router, for pieces with holes or curves.

From your size to your door

  1. Size

    Give the finished size and how many, as you did above. The plan shows the sheets they need.

  2. Price

    The price is worked out for your account. Send a whole cut list through the contact page.

  3. Cut

    Pieces are cut on a panel saw, or routed on a nesting machine when they have holes or curves.

  4. Edge

    The edges you chose are banded, trimmed and cleaned, then every piece is labelled.

  5. Deliver

    Pieces are stacked flat with corner guards, ready to collect or delivered.

Before you order

The edge of a sheet of plywood, showing its layers
The edge of birch plywood: thin layers glued crosswise.
How exact is the cut?

Pieces are cut to within half a millimetre of the size you give. Give the finished size; the saw cut is allowed for.

Can I order several sizes?

Price each size here, then send the whole cut list through the contact page. It is planned on as few sheets as it will go.

Which way does the grain run?

Pieces may be turned on the sheet to fit more of them. If the grain must run along the length, say so when you order.

What is the biggest piece you price here?

Up to 3600 mm on the longest side and up to 1,000 pieces. Bigger pieces and larger orders are priced by a person.

Why do I need to sign in to see the price?

Prices are worked out for your account. The cutting plan works without signing in; the price needs an account.

Is the edging in the price?

Not yet. The plan counts the metres of edging, and it is added to your quote when the order is confirmed.

Measured up?

Send a cut list

Pictures from Wikimedia Commons: Dornbirn-Plattenaufteilsäge-02, Asurnipal, CC BY-SA 4.0; Particleboard, Rotor DB, CC BY-SA 3.0; Plywood, Rotor DB, CC BY-SA 3.0; Edge banding a workpiece using the edge banding machine, Akpeski, CC BY-SA 4.0; Fulcrum Acoustic CNC Nesting Router, ChazGoodman, CC BY-SA 4.0.